STRB bearing

UCP 207 Vertical bearing seat with extended inner ring and set screw locking The vertical (axle table) ball bearing unit includes a recessed bearing mounted in a cast iron bearing seat that can be bolted to the support surface. This unit has high strength and hardness and is suitable for applications with fixed or alternating rotation directions. The inner ring is lengthened on both sides and is locked on the shaft by tightening the setting screw on the inner ring for easy installation. solid Suitable for constant and alternate rotation Easy to install Bearings are pre-greased and sealed Fast locking on the shaft High cost performance

The bearing material is filled with fiber reinforced and patented wear-resistant agents and self-lubricants for ultra-low friction coefficient. At the same time, the traditional seal lubrication is transformed into dry self-lubrication, and the life is easily increased by 3-30 times. Compared with similar products in Germany, the wear ring design is increased to prevent wear, and the bearing of the German brand is directly compared with the shaft grinding, which reduces the risk of grinding the shaft, reflects a lower friction coefficient and improves the stability of self-lubrication. Light weight high appearance level high surface contact load Self-lubrication maintenance-free corrosion resistance no rust Dust resistance Wear resistance Quiet and noiseless operation Effective avoidance of unplanned downtime Features of the new generation of maintenance-free spherical bearings: 1. Low friction Low dry friction coefficient, more wear-resistant, reduce starting torque, eliminate the main factor of adhesive wear. 2. Long service life, strong anti-wear ability Because of the elastic properties of the plastic matrix, when the friction particles enter the bearing inside, and then, as the shaft rolls out, they will not get stuck on the bearing, forming another friction source, so that the wear of the bearing and the shaft can be minimized 3. Dry starting Can dry run, sealed forced lubrication bearing, converted to dry lubrication, can greatly avoid the failure of the lubrication system, caused by bearing damage 4. Easy to process 5. Increase product efficiency 6. Overload capacity Seven. High elasticity and tenacity 8. Easy to install 9. Easy modification 10. Can contact water and oil Wanma bearings are reliable bearings in oil-water mixed environments. On the contrary, the lubricating oil used by the metal bearing will be emulsified and the lubrication will fail 11. Effectively avoid the risk of unplanned downtime There will be no sudden damage like traditional bearings, CHWM bearings in use for a long time have wear, you can plan to replace the bearing.

轮毂轴承是应用于汽车车轴处用来承重和为轮毂的转动提供精确引导的零部件，既承受轴向载荷又承受径向载荷，是汽车载重和转动的重要组成部分。

Maintenance-free bearings are used in the process without adding lubricants, as long as used properly, generally used to the end of life when the maintenance-free bearings are mainly characterized by: light weight high strength self-lubrication maintenance-free corrosion resistance dust resistance wear low friction coefficient lower than copper 8.3 times to replace stainless steel aluminum alloy copper products Maintenance-free bearings can also dry run, sealed forced lubrication bearings, into dry lubrication, it can greatly avoid the failure of the lubrication system, resulting in bearing damage, will not oil rise, can be used in oil-water mixing environment; Maintenance-free bearings significantly reduce the consumption of grease by optimizing the geometry and surface finish of the bearing channel, redesigning the reholder, combining the use of high-performance bearing steel with a unique heat treatment process, and improving the accuracy of the ball.

Precision bearing delivery

insert bearing with housing (insert bearing with housing) is a bearing unit that combines a rolling bearing with a bearing seat. Most of the outer spherical bearings are made of spherical outer diameters, and are installed together with the inlet bearing seat with a spherical inner hole. The structure is diverse, and the versatility and interchangeability are good. At the same time, this kind of bearing also has a certain aligning in design, is easy to install, has a dual-structure sealing device, and can work in harsh environments. Bearing seat is generally cast molding. Common seats are vertical seat (P), square seat (F), convex square seat (FS), convex circular seat (FC), diamond seat (FL), ring seat (C), slide block seat (T) and so on.

An aligning roller bearing is a bearing with a drum roller assembled between an inner ring with two raceways and an outer ring with spherical raceways. Aligning roller bearings have two rows of rollers, mainly bearing radial loads, but also can withstand axial loads in either direction. It has high radial load capacity, especially suitable for heavy loads or vibration loads, but cannot withstand pure axial loads. This kind of bearing outer ring raceway is spherical shape, so its aligning performance is good, can compensate for the coaxial error. Main applications: paper making machinery, reducer, railway vehicle axle, rolling mill gear box bearing seat, rolling mill roller, crusher, vibrating screen, printing machinery, woodworking machinery, all kinds of industrial reducer, vertical aligning bearing with seat.

Special bearings for machine toolsSpecial bearings for machine tools

All stainless steel bearingAll stainless steel bearing