The bearing material is filled with fiber reinforced and patented wear-resistant agents and self-lubricants for ultra-low friction coefficient. At the same time, the traditional seal lubrication is transformed into dry self-lubrication, and the life is easily increased by 3-30 times. Compared with similar products in Germany, the wear ring design is increased to prevent wear, and the bearing of the German brand is directly compared with the shaft grinding, which reduces the risk of grinding the shaft, reflects a lower friction coefficient and improves the stability of self-lubrication. Light weight high appearance level high surface contact load Self-lubrication maintenance-free corrosion resistance no rust Dust resistance Wear resistance Quiet and noiseless operation Effective avoidance of unplanned downtime Features of the new generation of maintenance-free spherical bearings: 1. Low friction Low dry friction coefficient, more wear-resistant, reduce starting torque, eliminate the main factor of adhesive wear. 2. Long service life, strong anti-wear ability Because of the elastic properties of the plastic matrix, when the friction particles enter the bearing inside, and then, as the shaft rolls out, they will not get stuck on the bearing, forming another friction source, so that the wear of the bearing and the shaft can be minimized 3. Dry starting Can dry run, sealed forced lubrication bearing, converted to dry lubrication, can greatly avoid the failure of the lubrication system, caused by bearing damage 4. Easy to process 5. Increase product efficiency 6. Overload capacity Seven. High elasticity and tenacity 8. Easy to install 9. Easy modification 10. Can contact water and oil Wanma bearings are reliable bearings in oil-water mixed environments. On the contrary, the lubricating oil used by the metal bearing will be emulsified and the lubrication will fail 11. Effectively avoid the risk of unplanned downtime There will be no sudden damage like traditional bearings, CHWM bearings in use for a long time have wear, you can plan to replace the bearing.

All stainless steel bearingAll stainless steel bearing

Outer spherical stainless steel bearing manufacturing manufacturers a large number of inventory and manufacturing capacity

The main features of stainless steel outer spherical bearings 1. The outer spherical bearing with seat can work under the condition that the two bearing seats are not coaxial, and the maximum automatic adjustment Angle can reach 2°. 2. Outer spherical bearing with seat has good rotation accuracy; It can be easily re-lubricated. The clearance is larger than that of the same size deep groove ball bearings, so the temperature difference has little influence on its accuracy. 3. The inner diameter of the outer spherical bearing with seat adopts "+" tolerance to form a clearance match with the shaft. The bearing is fixed on the shaft through the top wire, eccentric sleeve or tight sleeve on the upper side of the inner ring, which reduces the accuracy requirements of the shaft and makes it very convenient to install or replace the bearing. 4. Outer spherical bearing with seat is composed of outer spherical bearing and bearing seat. In use, there is no need to design the bearing box, small size, simple structure, can be directly bolted on the design part of the main engine, easy to use. 5. The outer spherical bearing with seat is generally pre-filled with grease and adopts the form of double or three lip seal. It is suitable for use in the occasions with more dust, mud and water and corrosive media, which is conducive to the work of the main engine. 6. Bearing seat as a whole structure, bearing capacity is large, good rigidity, bearing and bearing seat can be exchanged, that is, the same bearing seat can be installed with various types of bearings; Similarly, the same bearing can be matched with various types of bearing seats.